Metric To Standard Wrench Conversion Chart [2022]
Everyone has different types of wrenches and sae in their toolbox. As a result, it isn’t easy to measure metric to standard conversion. So, the below table is the balanced sheet of the standard to metric conversion charts.
It doesn’t matter what your setup is. This metric to standard conversion chart will give you the accurate measurement for the particularly given bolt.
Standard to Metric Conversion Charts 2022
| Bolt Diameter | Metric | Standard |
| 1/8″ | 8mm | 5/16″ |
| 3/16″ | 10mm | 3/8″ |
| 1/4″ | 11mm | 7/16″ |
| 5/16″ | 13mm | 1/2″ |
| 3/8″ | 14mm | 9/16″ |
| 7/16″ | 16mm | 5/8″ |
| 1/2″ | 19mm | 3/4″ |
| 9/16″ | 21mm | 13/16″ |
| 22mm | 7/8″ | |
| 5/8″ | 24mm | 15/16″ |
| 25mm | 1″ | |
| 3/4″ | 29mm | 1-1/8″ |
| 32mm | 1-1/4″ | |
| 7/8″ | 34mm | 1-5/16″ |
| 35mm | 1-3/8″ | |
| 1″ | 38mm | 1-1/2″ |
| 41mm | 1-5/8″ | |
| 1-1/8″ | 43mm | 1-11/16″ |
| 45mm | 1-3/4″ | |
| 1-1/4″ | 48mm | 1-7/8″ |
| 1-3/8″ | 51mm | 2″ |
| 1-1/2″ | 57mm | 2-1/4″ |
| 1-5/8″ | 64mm | 2-1/2″ |
| 1-3/4″ | 67mm | 2-5/8″ |
| 70mm | 2-3/4″ | |
| 1-7/8″ | 75mm | 2-15/16″ |
| 76mm | 3″ | |
| 2″ | 80mm | 3-1/8″ |
| 83mm | 3-1/4″ | |
| 2-1/4″ | 89mm | 3-1/2″ |
| 95mm | 3-3/4″ | |
| 2-1/2″ | 99mm | 3-7/8″ |
| 102mm | 4″ | |
| 2-3/4″ | 108mm | 4-1/4″ |
| 114mm | 4-1/2″ | |
| 3″ | 118mm | 4-5/8″ |
| 3-1/4″ | 127mm | 5″ |
| 3-1/2″ | 137mm | 5-3/8″ |
| 140mm | 5-1/2″ | |
| 3-3/4″ | 146mm | 5-3/4″ |
| 152mm | 6″ | |
| 165mm | 6-1/2″ | |
| 178mm | 7″ |
Now, you can easily convert metric to standard by using this table.
When it comes to wrench conversion, most people know about the standard system and the metric system. But what is the metric system, and how does it differ from the standard system? In this blog, we’ll answer these questions and more, so that you can understand wrench conversion better. We’ll also provide a guide on how to convert between metric and standard measurements, so that you can work with tools in either system with ease. So read on to learn more about wrench conversion – and how it can help you work smarter and faster!
What is the metric system?
If you’re ever in a bind and don’t know which wrench to use when converting between the metric and standard systems, don’t worry! The metric system is based on the meter and the gram. This means that you can use any wrench that is metric or standard (depending on your country), to make the conversion. Just be sure to use the same units when doing the conversion – meters for length, grams for weight etc… The metric wrench will typically have the metric system written on it, while the standard wrench will have the standard system written on it. There are many different types of wrenches available in both systems, so it’s important to find one that works for your projects.
What is a wrench?
When it comes to tools, there’s always a need for the right wrench for the right job. This is especially true when it comes to fasteners, which can be adjusted with a wrench in a number of ways. A wrench can be either metric or standard size, and the jaws on it usually have either a Metric or Standard layout. Make sure you know which type your wrench is before using it, as this will help you avoid any potential damage. Additionally, always use a wrench that is meant for fasteners that are not meant for standard use – this will ensure that you get the job done properly. And, lastly, always use a wrench that is of the correct size for the fasteners you’re working with. With a little bit of know-how, wrenching will be a breeze!
How to convert between metric and standard measurements?
There’s no need to be a whiz with metric and standard measurements – you can easily convert between the two with a little help from this guide. The most common wrench uses for STANDARD measurements, so it’s important to be familiar with which wrench corresponds to which measurement. Metric is based on the system defined in 1795 by Jean-Baptiste Lamarck, while standard is the English measurement system that dates back to 1665. To convert between the two, use this simple equation: Standard = 2 x Metric. So, a wrench that measures 10 mm in standard would be 20 mm in metric. If you ever get stuck and don’t know which wrench to use for a particular measurement, just use this conversion chart to help you out!
Frequently Asked Questions
Can I safely use wrenches from other countries with my American-based tools?
The answer to this question depends on the type of wrench and the torque specifications of the tool. Generally, wrenches that are designated for use in one country or another using ASME/ANSI standards will not damage a wrench if they are used with an appropriate wrench socket from the other country. However, it is always advisable to consult the torque specification chart for the specific wrench you are using.
What is the metric system and how does it differ from the standard system?
The metric system is a system of measurement based on the kilogram and metre. The standard system is the system used in the United States, Britain, and many other countries.
Why are some wrenches not labeled in either the metric or standard systems?
The metric system is based on the metric system of measurements, while the standard system is based on the English system of measures. There are some wrenches that were originally made in both systems, but over time they have been produced only in the metric system.
Conclusion
After reading this blog, you will be able to convert between metric and standard measurements with ease. The metric system is the international standard for measuring size, and wrenches are the tools used to adjust or tighten these measurements. By understanding how metric and standard wrench conversion works, you’ll be able to shop for the right wrench for the job, and avoid any conversion headaches in the future.
